On the off chance that you possess a Linksys router or extender, you can anchor it by either empowering a remote security secret phrase, empowering a wireless media to get to control (MAC) channel, or by crippling the administration set identifier (SSID) communicate of the router. You can do it either at the time of Linksys extender setup or even after that.
What's inside for you:
- How to enable a Wireless Security Password
- What's the deal with enabling a MAC Filter Disabling the SSID
Enabling a Wireless Security Password
As per the default settings, the IP address for your Linksys router will be "192.168.1.1," except if you had transformed it at a past point in time. Further, you have to go through the steps given underneath:
- Type in the username and secret key for your router at the login provoke. You will at that point be coordinated to the home screen of the setup page.
- Leave the username bar clear, and afterward type "admin" into the secret phrase field only on the off chance that you have never shown signs of change these from its default settings. And if this doesn't work, consult to extender.linksys.com support for real-time assistance.
- Move on to the "Wireless" tab, and afterward, tap on "Wireless Security."
- Tap on the "Manual" radio button which is located alongside the "Setup View."
- Choose a security mode from the drop-down menu alongside "Security Mode." You will have the choice to pick a dimension of security from WEP, WPA Personal, and WPA2 Personal, with WEP being the most essential security setting, and WPA2 Personal being the most grounded security setting.
- Set a secret phrase of your decision into the field by "Passphrase." Your secret phrase must be somewhere around 8 characters in length and is case-touchy.
- Thereafter, tap on "Spare settings." Going forward, clients must sort in your secret key to access your Linksys router's settings portal.
Enabling a MAC Filter for Security Use
Follow the same steps provided above for Linksys Extender Router Login and once you are on the settings portal, execute the steps given below:
- In the router or extender’s settings portal, tap on “Wireless,” then on the “Wireless MAC Filter.”
- Under this section, tap on the "wireless MAC Filter" under the "wireless” settings.
- Further, select the radio catch alongside "Enabled."
- Here, you have to select the option stating “Allow PCs recorded underneath to get to the wireless network."
- Now select the "Wireless Client List" - a rundown of all gadgets that are as of now associated with your network will shown on screen.
- Click on the drop-down menu by "Sort By" and select "Mac Address." A table showing different MAC Address fields will be shown on-screen.
- Enter the data for every PC into the MAC Address table as appeared in the "Remote Client List" window. You will be required to enter the name of every PC for which you need offered access to your router, and in addition its IP address, MAC address, and interface type.
- Click on "Include" to include every PC into the rundown of allowed gadgets permitted to get to your remote system. And, in case you face any issue such as cannot connect to Linksys extender, you can reset Linksys Range Extender to default settings.
- Finally, tap on "Spare settings." Going forward, just the PCs and gadgets you have determined will be enabled access to your Linksys router.
Tips
- Impairing the SSID broadcast settings won't make your network promptly visible to other nearby clients; you may in any case, need to empower a more grounded security setting, to make it more difficult for other users to access your router and the network.
- Changing the settings of your router will briefly disengage all gadgets associated with your router. Make sure to log again into your router on every gadget utilizing the new security settings that you have recently empowered.