Road safety is paramount, but the crashes on the nation’s roadways continue to be one of the major causes of fatalities and cause several serious injuries, especially in rural areas. Roughly half of all the fatal crashes often happen at horizontal curves or intersections. Intersection crashes also occur when driver error creates an unexpected need for increases friction demand to serve as a “speed countermeasure”. To avoid this high fraction surface treatment is the best way. It adds the necessary resistance on the road that reduces the probability of crashes.
One very low-cost approach but an effective way to address this issue is installing a High Friction Surface Treatment (HFST). The High Friction Surface Treatment contractors conduct specialized pavement surface treatments. This composition of very hard, polish- and abrasion-resistant aggregates bonded to the pavement surface, which greatly enhances the skid resistance and the frictional characteristics of a road surface. HFSTs address three speed-related crash conditions: low friction, marginal friction, and friction values that are not compatible with geometrics and approach speeds.
There are apex bodies and councils that work to assist the superior policymakers to understand the impact of friction demand better on roadway safety and the significant role which high friction surfacing can play to improve the safety parameters at the high-risk locations that are more accident-prone. The council members also aim to provide all the latest information related to high friction surface treatments that will be the most helpful in the ongoing efforts to create a much safer driving environment for all motorists.
The high friction surface treatment contractors are well-trained and well-experienced to do the job
From the above discussion, we can conclude that surface treatment is effective in reducing road mishaps. But you need qualified and experienced contractor for this task. The high friction surface treatment contractors are specialized to conduct the process of high friction surface treatment. To get the best result, you must always hire an experienced high friction surface treatment contractors. They are experts in accomplishing high friction surface treatments that significantly enhance surface friction and reduce road accidents. Several companies use tow binders for conducting the process of high friction surface treatment – T-28 HFSR Methyl Methacrylate (MMA) resin binder & Transpo’s E-Bond 526 HFST Epoxy resin binder. Both of these are capable of rapid cure on asphalt and concrete surfaces. When incorporated with broadcast aggregates, all of these high friction surface treatments can reduce the chances of accidents and fatality rates on several hazardous roadways.
The inevitable need for the high friction surface treatment
- The high friction surface treatment is a life-saving safety enhancement. It helps in increasing the skid resistance of the pavement surface under dry or wet conditions. The drivers benefit from the shorter stopping distances and greater traction on curves and hills on the treated road. A two-part epoxy binder is being used to the road, and then immediately followed by an aggregate topping. The aggregate's uniquely angular geometry provides for the high friction of the ultimately finished surface of the road. The Federal Highway Administration broadly classifies the high friction surface treatments as one of the lowest costing safety solution. This qualifies for safety funding under highway safety improvement programs.
Conclusion
The high friction surface treatment is effective and helps in reducing the probability of road accidents. Its typical applications are intersections, pedestrian crossings, cycle paths, pedestrian walkways and high accident level areas. All you need to do is to hire a reliable high friction surface treatment contractor for this. They will ensure quality work, and thus giving you the best quality work.