Security cameras are being installed everywhere whether it is shop, office or home with one sole purpose to protect your property and loved ones from thieves and burglars. When you get the security camera it is also good to learn how to set it up and also learn a few troubleshooting steps too because it may come handy when you would not be able to find any help around. In this article, we have written about the steps to install a Dahua camera system along with a few basic troubleshooting methods too.
Finalize on the place for both the camera and the DVR
This is one of the most crucial things that one must know when they are planning to install a camera. Unless and until the place is right the cameras would not be safe. Also, if the place selected is wet or is susceptible to moisture then, it would become a major blunder. Hence, choosing the right place is mandatory. The place for the DVR also should be apt because this is also one of the most important parts of the security camera. Hence, choosing the right place for both the Dahua camera system and the DVR is essential.
Get to know the cables right
Once you have finalised on the place make sure that you understand the cables that are to be connected. There might be multiple cables and they need to be connected the right way else, the device would not work the way it has to. Ensure to go through the instruction manual or even watch videos that can help you in connecting the devices properly. Only when the wires and cables are in place would the device work properly.
Get the connections right and then test the device
Once the connections are all set, ensure to test the device by switching them on. The power supply has to be proper and also you must make sure to check if the power supply is also in working condition. Else, testing the device would fail completely. Hence, only when you test the device you would be available to make sure to check for the functionality properly. Now that we have understood a few basic steps to install the camera, let us quickly understand some of the troubleshooting steps that can help you to repair the Dahua camera system.
The first and the foremost thing that one must know when you are planning to troubleshoot Dahua camera system is to first check the power supply system.
Later, you need to make sure to get in touch with electricians if there is some issue with the power supply.
If there is some trouble with the Dahua camera system, make sure to first get in touch with the technical support system even before you try doing anything at all.
Once the instructions are given on the phone you may start following the instructions by disconnecting all the cables and wires that are connected to different systems.
Check for the battery and if there is a warning related to the battery then, it is recommended to replace the batteries immediately. The low battery warning should be appearing at the main panel and not at the transmitter panel for you to change the batteries.
Check for the phone lines and also other communication connections if you are unable to connect using the security systems. If these things work fine it would be great else, you can always get in touch with the Dahua camera system dealer and schedule a technician to come home.
These are some of the basic steps that you need to follow when you are installing or troubleshooting the security systems.