It is not uncommon that in our own home we have WiFi coverage problems. Depending on the power, the router may not reach all the rooms and to rectify this lack, WiFi repeaters are needed. These devices are capable of forwarding the router signal, doubling its range and making it possible for the coverage to be distributed in all corners. It is a good option to improve connectivity in our home but we must think wisely when choosing one.
Before getting hold of a WiFi repeater, we recommend you consult these tips on how to improve the WiFi connection without purchasing another device. At the end of the day there may be simpler solutions to improve coverage , such as placing the router in a more appropriate position or placing another old router doing the repeater functions.
However, if these solutions fall short you have to consider more sophisticated measures and the most appropriate is to look for WiFi repeaters. And when thinking of wireless extenders, Linksys is not little-known. The Linksys Wireless-N Range Extender gives you a chance to rehash the wireless signals of any router to provide Internet network connectivity in difficult to achieve spots in your premise through a wired or wireless association.
This article will direct you on the most proficient method for how to setup Linksys extender. Also included, fruitful tips to improve the wireless connectivity. However, before you start, ensure that you've done the accompanying:
Grab the extender’s WiFi information:
- Name of the Wireless Network (SSID)
- Second is Wireless channel
- And the wireless secret key or security/arrange key
- To figure out how to check or change your wireless network's settings you can utilize the Linksys cloud account.
- In the event that you prefer to setup your router using the online setup page, you may use
http//extender.linksys.com.
Note: During the installation and setup, extender must be placed in the range of the router. Reason being, it can forward the signal to other equipment further away, as well as receive data packets from these devices and return them to the router. The most appropriate thing is to try to distance it as much as possible from the signal transmitter, without it being impaired.
Prior to initiate the extender setup, you must reset your range extender
Reset the range extender - Press and hold the Reset catch situated at the best board of the range extender for five (5) seconds or until the point that the LED begins squinting to reestablish to its processing factory default settings. Thereafter, execute the Linksys smart WiFi setup steps given below:
- Interface your PC to the Ethernet port of your range extender utilizing an Ethernet link.
Tip: Steps may change contingent upon the sort of PC or range extender you are utilizing. In this precedent, a RE2000 is utilized.
- Attach your range extender to the electrical plug. Ensure the LED lights are steady.
- Dispatch an internet browser and enter your switch's IP Address or "http://extender.linksys.com" in the Address bar. To figure out how to check the IP Address of your Linksys router, click here.
NOTE: If your PC has characterized a default startup page on the web browser, the exchange box requesting a username and secret word will naturally show up.
- You will be provoked with a window requesting a username and secret phrase. Leave the User Name clear and enter "admin" in the Password field and afterward, click Log In.
- Snap Wireless > Basic Wireless Settings.
- Set the wireless catch to Manual at that point enter your router's Network Name (SSID).
- On the Wireless Security segment, select the security settings that coordinate your switch's setup. Enter your Passphrase or WEP Key at that point click Save Settings.
Help TIP: For ideal Wireless-N execution, it is prescribed to utilize WPA/WPA2 remote security on your router and range extender.
- Unplug the power links of the router and the range extender for 30 seconds. Attach the extender that every one of the lights will be steady at that point plug in the range extender.
- Now your range extender will be synchronized with your router.
TIP: In request to ensure that your extender is effectively introduced, get to your router’s DHCP table and check if the range extender is recorded there with its IP Address. Ping the extender utilizing a remote PC and check in the event that you can get answers from it. To figure out how to check gadgets associated with your router through the DHCP table, take assistance from http//extender.linksys.com support.
Extending your system
Beside the range extenders, there are additionally different gadgets accessible in the market today that can enable you to broaden your network connectivity either wired or remotely, for example, access points, wireless bridges and so forth. You can pick which of these items that precisely fit your need. For guidelines on the most proficient method for your Linksys gadget, contact with Linksys wireless extender setup support.
Tips to Improve Wireless Connectivity
If you have problems such as low speed, bad reception even after the Linksys smart WiFi setup, here are some tips that can help you out:
Uses the latest Wi-Fi protocol
One of the best ways to make sure your Wi-Fi network is as fast and reliable as possible is to make sure you're using new and appropriate hardware. The most important thing you need to know is that there are several protocols: A, B and G are old, slow and outdated, N should be the minimum currently, although the ideal is AC and the use of technologies such as MIMO . Keep in mind that you need both the router and the extender to use Wireless N or Wireless AC to take advantage of its advantages.
Find the perfect place for your Extender
The extenders are often, to be honest, quite ugly but unfortunately that does not mean that we can hide behind the TV cabinet. If we want the best possible signal, we have to have them to the vita and without obstacles, like walls. If you have two antennas, place them perpendicularly, and elevate the router if you can (the attic may even be a good idea). Finally, make sure that it is more or less in the center of your house, so that the coverage is distributed more or less uniformly by it.
Find the appropriate Wi-Fi channel
If you have neighbors, there is the possibility that their extenders and routers are interfering with yours and causing the signal to degrade. Wireless routers can operate in a series of different channels and ideally, place yours in one that has the least amount of interference possible. Use a tool such as Wi-Fi Analyzer to find the right channel.
Get rid of Interference
Neighborhood extenders and routers may not be the only cause of interference. Cordless phones, microwaves and other devices can get tangled up with your sleep too. Buying a dual band router can help you with this, or simply choose the compatible channel at the time of Linksys wireless extender setup. Another good idea is to remove possible sources of interference as much as possible.
Frustrate WiFi thieves by improving security
Even if your extender has a password, it can be incredibly simple to hack. There are always easy ways to find out the password of another router, more if it uses the factory password. The best way to prevent yourself against freeloaders is to increase the security of the router. Using a WPA key is absolutely essential, but even those are vulnerable, so the ideal is to use one that is long and personalized .
Control applications that eat up the Bandwidth
If there is someone in your house who frequently uses video calls, plays online, downloads torrents or uses services such as Netflix, it is possible that they are eating much of the bandwidth and slowing down the speed for the rest of the user. Fortunately, there is something called QoS ( Quality of Service ). With QoS, you can give preference to certain applications (for example, video calls) or others (video games) so that the most important applications get the bandwidth they deserve.
----- For more information on Linksys smart WiFi setup, consult our complete guide.