Concrete is a widely used construction material made up of cement, coarse and fine aggregates, and water. It comes in various forms, from dry premix sold in bags to ready-mixed supplied by truck from a batching facility. As long as you have the appropriate saw, it may be produced on-site or supplied as precast beams and similar structures, or even painted or cut.
It has high compressive strength, a low tensile strength, and good fire resistance as an engineering material. It is one of the most cost-effective construction materials. In such cases, concreting experts would be well-versed in its preparation and application processes.
To complete the framework of your building, you need to use some concrete slabs and beams. These are the support systems of your building, and you cannot make any correction on these slabs and beams once you place them in their position.
Concreting slabs and beams is the most difficult task because you must check their shuttering plates before starting your concreting process. Plates with damaged edges and uneven surfaces can make your building weak.
You can use plywood for concreting, such as slabs and beams, but you must use high-grade plywood for the same. You can find some BWP grade plywood in the market, which is mostly used for construction. It is better to hire an engineer and concreter in this regard. They can check the durability of the reinforcement andcheck the slopes, level of slabs and beams before placing them in their position.
How Would You Concrete Your Beams And Slabs?
Concrete materials are used in the construction industry because they are durable and they can withstand heavy loads. Concreting the slabs, beams, walls, floors, driveways, and ceiling is very common, and people can use concrete membranes on various surfaces. You need to prepare the base with concrete for installing stones, like marble, limestones and tiles. So without hiring professional concreters, you cannot complete your construction project. Preliminary, to start your construction process, you need to install some concrete beams and slabs on your project site, and you should use such slabs on your floors too. So you need to reinforce such slabs and beams properly.
- Concrete slabs and beams can keep your building safe from any kind of vibration. For example, they can keep your building safe during an earthquake. It is better to hire professional concreters for concreting such slabs and beams. They can use some oil and grease on the shutter plates to remove such plates easily, and they can make your slabs and beams with 12 mm PVC pipes. It should be implemented on your roof with slopes, and you need to install such beams according to their size and diameter.
- While youconcretingyour slabs and beams, you need to join these beams properly and check the bottom of such beams before you place them. Once you level the beam bottom, you can add proper support to the beams, and you should close the shuttering gaps beforeconcretinga slab.
- It is suggested to avoid using scrap materials on the shuttering plates of your beams and slabs because such scraps materials can affect the thickness of the plaster. You can measure the thickness of such slabs from their side, and you can use some wooden props in your framework. But, using wooden plates can make your slabs heavy, and you cannot use them on your ceiling. You can use such wooden plates for concreting your floor.
Final Words
At the time of concreting your balcony, and these are known as cantilever slabs. It is tough to make such concrete slabs, and you must hire trained concreters for the same. They can properly make such cantilever slabs, and cast such slabs in a proper size. For example, they can maintain a plinth height of 0.9 meters and floor height of 3 meters, and they can place the props in your slabs with 1.9-4 meter height. So you cannot understand such technical details of such slabs, and you cannot even make them with your DIY tools.