Are you trying to change the look and feel of your house by new window coverings? Well, windows often become the focal point of a room and therefore, if you change their appearance, it will reflect in the whole room overall. There are various kinds of window treatments available, right from curtains, shades, to blinds. However, blinds have become an undisputed winner in this case owing to the convenience, functionality, and aesthetic advantage that these provide.
Whether you opt for the Venetian, Roller, or Roman Blinds- choose whatever takes your fancy but there are certain things you must know before choosing these from renowned companies offer quality blinds Berwick, Cranbourne, Lynbrook, Hampton Park or any other place in Australia. Here, we have put together a few of those things. Take a look.
Understand the Fittings
You must know that the blinds can be installed either outside the window or inside the window recess for proper fittings. If you want such an exact fitting for your blinds, then you should try and decide the look you prefer first. Sometimes, you will be able to do either of these two options. In that case, you will not have an option. Moreover, there are some blinds which take up a little more space than the others. So, this also needs to be considered when you are buying the blinds. Next, you should think about whether you want a made-to-fit option or not. The blind will be made to fit the window and works according to its proportions. But you can still use the window sill and the wall around the window.
Get a Clear View
Sometimes, the exact fitting can create an impression of a wider or a taller window by either fitting the blind far above the window or pick a blind option that is wider than the window. This helps you to get a clear view from your window when the blind is up. But a fitted blind outside the recess might use up the wall space and get in the way of furniture. So, if you want a good view from your rooms, then you can install the blind in this manner.
Measure in 3 Places
When you are attempting to get a recess fitting, you should measure the width of the recess in 3 areas- the top, middle, and the bottom. You should take the smallest measurement in the centimetres and round it down so that the blind completely fits inside the recess. The length of the blind also referred to as the drop, is calculated from the top to the window insides and straight until the window sill. You should measure again from the top and see if you can accommodate more to the drop of the blind so that it doesn't need to be unfurled.
Check the Outer Measurements
You must also decide to what extent you want the blind to be hanging outside the window for all those blind options which are supposed to hang outside the window. Generally, people leave out around 10cm above the window recess and a minimum of 7 cm on every side. So, decide where you would want the blind to end, on the window sill or just below it but a little longer may make it look better.
So, what are you thinking? Don’t delay anymore and quickly take note of these and purchase your window treatments from a company which excels in the quality and design of blinds Cranbourne, Pakenham, keysborough, and so on.
Author Bio: Kylie Parker, a regular blogger on blinds Berwick, Pakenham, Lynbrook, or elsewhere in Australia, here writes on 4 things to know about blinds Cranbourne, Keysborough, Hampton Park, and so on.